Western blot (WB): | 1:500-2000 |
Immunohistochemistry (IHC): | 1:50-400 |
Immunofluorescence (IF): | 1:50-400 |
Flow Cytometry (Fixed): | 1:50-200 |
(Boiling the paraffin sections in 10mM citrate buffer,pH6.0,or PH8.0 EDTA repair liquid for 20 mins is required for the staining of formalin/paraffin sections.) Optimal working dilutions must be determined by end user. |
Western blot analysis of ACTN3 using anti-ACTN3 antibody (PB10026). The sample well of each lane was loaded with 30 ug of sample under reducing conditions.
Lane 1: HT1080 whole cell lysates,
Lane 2: rat skeletal muscle tissue lysates,
Lane 3: rat skeletal muscle tissue lysates,
Lane 4: mouse skeletal muscle tissue lysates,
Lane 5: mouse skeletal muscle tissue lysates.
After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-ACTN3 antigen affinity purified polyclonal antibody (PB10026) at a dilution of 1:1000 and probed with a goat anti-rabbit IgG-HRP secondary antibody (Catalog # BA1054). The signal is developed using ECL Plus Western Blotting Substrate (Catalog # AR1197). A specific band was detected for ACTN3 at approximately 103 kDa. The expected band size for ACTN3 is at 103 kDa.
IHC analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of mouse skeletal muscle tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of rat skeletal muscle tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of human lung cancer tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IF analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of mouse skeletal muscle tissue. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:100. FITC Conjugated AffiniPure Goat Anti-rabbit IgG (H+L) Secondary Antibody (green) (Catalog # BA1105) was used as secondary antibody.
Flow Cytometry analysis of WISH cells using anti-ACTN3 antibody (PB10026).
Overlay histogram showing WISH cells stained with PB10026 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ACTN3 Antibody (PB10026) at 1:100 dilution for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG at 1:100 dilution used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Western blot analysis of ACTN3 using anti-ACTN3 antibody (PB10026). The sample well of each lane was loaded with 30 ug of sample under reducing conditions.
Lane 1: HT1080 whole cell lysates,
Lane 2: rat skeletal muscle tissue lysates,
Lane 3: rat skeletal muscle tissue lysates,
Lane 4: mouse skeletal muscle tissue lysates,
Lane 5: mouse skeletal muscle tissue lysates.
After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-ACTN3 antigen affinity purified polyclonal antibody (PB10026) at a dilution of 1:1000 and probed with a goat anti-rabbit IgG-HRP secondary antibody (Catalog # BA1054). The signal is developed using ECL Plus Western Blotting Substrate (Catalog # AR1197). A specific band was detected for ACTN3 at approximately 103 kDa. The expected band size for ACTN3 is at 103 kDa.
IHC analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of mouse skeletal muscle tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of rat skeletal muscle tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of human lung cancer tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IF analysis of ACTN3 using anti-ACTN3 antibody (PB10026).
ACTN3 was detected in a paraffin-embedded section of mouse skeletal muscle tissue. The tissue section was incubated with rabbit anti-ACTN3 Antibody (PB10026) at a dilution of 1:100. FITC Conjugated AffiniPure Goat Anti-rabbit IgG (H+L) Secondary Antibody (green) (Catalog # BA1105) was used as secondary antibody.
Flow Cytometry analysis of WISH cells using anti-ACTN3 antibody (PB10026).
Overlay histogram showing WISH cells stained with PB10026 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ACTN3 Antibody (PB10026) at 1:100 dilution for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG at 1:100 dilution used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.