Western blot (WB): | 1:500-2000 |
Immunohistochemistry (IHC): | 1:50-400 |
Flow Cytometry (Fixed): | 1:50-200 |
Enzyme linked immunosorbent assay (ELISA): | 1:100-1000 |
(Boiling the paraffin sections in 10mM citrate buffer,pH6.0,or PH8.0 EDTA repair liquid for 20 mins is required for the staining of formalin/paraffin sections.) Optimal working dilutions must be determined by end user. |
Western blot analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2). The sample well of each lane was loaded with 30 ug of sample under reducing conditions.
Lane 1: Human HELA whole cell lysates,
Lane 2: Human HepG2 whole cell lysates,
Lane 3: Human K562 whole cell lysates,
Lane 4: Human U2OS whole cell lysates,
Lane 5: Human A549 whole cell lysates,
Lane 6: Human PANC-1 whole cell lysates,
Lane 7: Human CACO-2 whole cell lysates.
After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-Cyclin E1/CCNE1 antigen affinity purified polyclonal antibody (A00543-2) at a dilution of 1:1000 and probed with a goat anti-rabbit IgG-HRP secondary antibody (Catalog # BA1054). The signal is developed using ECL Plus Western Blotting Substrate (Catalog # AR1197). A specific band was detected for Cyclin E1/CCNE1 at approximately 47 kDa. The expected band size for Cyclin E1/CCNE1 is at 47 kDa.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of human placenta tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of human placenta tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of human lung cancer tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of Mouse testis tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of rat testis tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
Flow Cytometry analysis of SiHa cells using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Overlay histogram showing SiHa cells stained with A00543-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at 1:100 dilution for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG at 1:100 dilution used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Western blot analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2). The sample well of each lane was loaded with 30 ug of sample under reducing conditions.
Lane 1: Human HELA whole cell lysates,
Lane 2: Human HepG2 whole cell lysates,
Lane 3: Human K562 whole cell lysates,
Lane 4: Human U2OS whole cell lysates,
Lane 5: Human A549 whole cell lysates,
Lane 6: Human PANC-1 whole cell lysates,
Lane 7: Human CACO-2 whole cell lysates.
After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-Cyclin E1/CCNE1 antigen affinity purified polyclonal antibody (A00543-2) at a dilution of 1:1000 and probed with a goat anti-rabbit IgG-HRP secondary antibody (Catalog # BA1054). The signal is developed using ECL Plus Western Blotting Substrate (Catalog # AR1197). A specific band was detected for Cyclin E1/CCNE1 at approximately 47 kDa. The expected band size for Cyclin E1/CCNE1 is at 47 kDa.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of human placenta tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of human placenta tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of human lung cancer tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of Mouse testis tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
IHC analysis of Cyclin E1/CCNE1 using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Cyclin E1/CCNE1 was detected in a paraffin-embedded section of rat testis tissue. Biotinylated goat anti-rabbit IgG was used as secondary antibody. The tissue section was incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at a dilution of 1:200 and developed using Strepavidin-Biotin-Complex (SABC) (Catalog # SA1022) with DAB (Catalog # AR1027) as the chromogen.
Flow Cytometry analysis of SiHa cells using anti-Cyclin E1/CCNE1 antibody (A00543-2).
Overlay histogram showing SiHa cells stained with A00543-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Cyclin E1/CCNE1 Antibody (A00543-2) at 1:100 dilution for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG at 1:100 dilution used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.